Field definitions
The MARIS data is converted to a standardized CSV format for importing into the MARIS database using Open Refine. The standardized variable names for Open Refine are provided in Table 1, and a detailed description of each variable is given below. Additionally, MARIS data is available in NetCDF4 format. The standardized variable names for NetCDF4 are also provided in Table 1, with descriptions for each variable included below.
Table 1 Standardized Variable Names (Open Refine and NetCDF)
| Friendly Name | Open Refine Name | NetCDF Name |
|---|---|---|
| Sample quality | sampquality | _ |
| Sample type ID | samptype_id | Sample type included as netcdf.group |
| Laboratory ID | lab_id | lab |
| Latitude | latitude | lat |
| Longitude | longitude | lon |
| Station | station | _ |
| Sample lab code | samplabcode | _ |
| Profile ID | profile_id | _ |
| Transect ID | transect_id | _ |
| Sampling depth | sampdepth | smp_depth |
| Total depth | totdepth | tot_depth |
| Begin period | begperiod | time |
| End period | endperiod | _ |
| Nuclide ID | nuclide_id | nuclide |
| Detection | detection | dl |
| Activity | activity | value |
| Uncertainty | uncertaint | unc |
| Unit ID | unit_id | unit |
| Variable type | vartype | _ |
| Frequency | freq | _ |
| Range low detection | rl_detection | _ |
| Range low | rangelow | _ |
| Range upper | rangeupp | _ |
| Species ID | species_id | species |
| Biological group | _ | bio_group |
| Taxon name | Taxonname | _ |
| Taxon reported name | TaxonRepName | _ |
| Common name | Commonname | _ |
| Taxon rank | Taxonrank | _ |
| Taxon database | TaxonDB | _ |
| Taxon database ID | TaxonDBID | _ |
| Taxon database URL | TaxonDBURL | _ |
| Body part ID | bodypar_id | body_part |
| Slice up | sliceup | top |
| Slice down | slicedown | bottom |
| Sediment type ID | sedtype_id | sed_type |
| Sediment reported name | SedRepName | _ |
| Volume | volume | _ |
| Salinity | salinity | salinity |
| Temperature | temperatur | temperature |
| Filtered | filtered | filtered |
| Filter pore | filtpore | _ |
| Acidified | acid | _ |
| Oxygen | oxygen | _ |
| Sample area | samparea | _ |
| Dry weight | drywt | drywt |
| Wet weight | wetwt | wetwt |
| Percent weight | percentwt | _ |
| Sampling method ID | sampmet_id | samp_met |
| Drying method ID | drymet_id | _ |
| Preparation method ID | prepmet_id | prep_met |
| Counting method ID | counmet_id | count_met |
| Reference ID | ref_id | _ |
| Reference note | refnote | _ |
| Sample note | sampnote | _ |
| Measurement note | measurenote | _ |
| Good for export | gfe | _ |
| Area | area | area |
Variable Descriptions
Sample Quality
Description:
Defines the quality of the sample. Examples include: Good (G), Caution (C), Fail (F).
Lookup Table (LUT) in use:
No.
Open Refine Variable Name:
sampquality
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF
NetCDF Data Type:
Not included in NetCDF
Sample Type ID
Description:
In MARIS, samples are categorized by type into WATER, BIOTA, SEDIMENT, and SUSPENDED types. The NetCDF data format separates MARIS data into ‘NetCDF groups’ by the sample type. Open Refine formats MARIS data into separate CSV files by sample type.
- SEAWATER includes seawater and brackish water.
- BIOTA includes various types of biota.
- SEDIMENT includes various types of sediments.
- SUSPENDED includes various types of suspended matter.
Lookup Table (LUT) in use:
No.
Open Refine Variable Name:
samptype_id
Open Refine Data Type:
An integer value : - 1 : SEAWATER - 2 : BIOTA - 3 : SEDIMENT - 4 : SUSPENDED
NetCDF Variable Name:
Sample type is included as netcdf.group
NetCDF Data Type:
string
Laboratory ID
Description:
The Laboratory ID identifies the laboratory that processed the sample.
Lookup Table (LUT) in use:
Yes, dbo_lab.xlsx
Open Refine Variable Name:
lab_id
Open Refine Data Type:
An integer value (the ‘id’ defined in the LUT).
NetCDF Variable Name:
lab
NetCDF Data Type:
An integer value (the ‘id’ defined in the LUT).
Latitude Decimal
Description:
Latitude in decimal format (DDD.DDDDD°) with ranges from -90° to 90°.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
latitude
Open Refine Data Type:
Float with values between -90° to 90°.
NetCDF Variable Name:
lat
NetCDF Data Type:
Float with values between -90° to 90°.
Longitude Decimal
Description:
Longitude in decimal format (DDD.DDDDD°) with ranges from -180° to 180°.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
longitude
Open Refine Data Type:
Float with values between -180° to 180°.
NetCDF Variable Name:
lon
NetCDF Data Type:
Float with values between -180° to 180°.
Station
Description:
The name of the station where the sample was collected.
Lookup Table (LUT) in use:
No.
Open Refine Variable Name:
station
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Sample Lab Code
Description:
The data provider’s sample laboratory code should be stored exactly as provided, without any modifications.
Lookup Table (LUT) in use:
No.
Open Refine Variable Name:
samplabcode
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Profile ID
Description:
Profile ID is provided as is by the data provider and is an identifier for linking data which are part of a sequence, i.e., a vertical profile.
Lookup Table (LUT) in use:
No.
Open Refine Variable Name:
profile_id
Open Refine Data Type:
string
NetCDF Variable Name:
Not defined in NetCDF.
NetCDF Data Type:
Not defined in NetCDF.
Transect ID
Description:
Transect ID is provided as is by the data provider and is an identifier for linking data which are part of a sequence, i.e., a horizontal transect.
Lookup Table (LUT) in use:
No.
Open Refine Variable Name:
transect_id
Open Refine Data Type:
string
NetCDF Variable Name:
Not defined in NetCDF.
NetCDF Data Type:
Not defined in NetCDF.
Sampling Depth
Description:
Depth from the water surface in meters at which the sample was taken. A value of “0” indicates that the sample was collected at the surface. A value of “-1” indicates that sample depth information is not available.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
sampdepth
Open Refine Data Type:
Float
NetCDF Variable Name:
smp_depth
NetCDF Data Type:
Float
Total Depth
Description:
Total water column depth in meters (m).
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
totdepth
Open Refine Data Type:
float
NetCDF Variable Name:
tot_depth
NetCDF Data Type:
float
Begin Period
Description:
‘Begin Period’ refers to the date when the collection of sample(s) began. If only a year is provided in the dataset, set the date to January 1st of that year (e.g., 2024 becomes 2024-01-01). If both a year and month are provided, set the date to the first day of that month (e.g., May 2024 becomes 2024-05-01). Date format of yyyy-mm-dd.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
begperiod
Open Refine Data Type:
DATETIME string in the format (yyyy-mm-dd hh:mm:ss)
NetCDF Variable Name:
time
NetCDF Data Type:
DATETIME string in the format (yyyy-mm-dd hh:mm:ss)
End Period
Description:
‘End Period’ refers to the date when the collection of sample(s) ended. If only a year is provided in the dataset, set the date to January 1st of that year (e.g., 2024 becomes 2024-01-01). If both a year and month are provided, set the date to the first day of that month (e.g., May 2024 becomes 2024-05-01). Date format of yyyy-mm-dd.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
endperiod
Open Refine Data Type:
DATETIME string in the format (yyyy-mm-dd hh:mm:ss)
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Nuclide ID
Description:
Identifier for a specific nuclide (isotope) within the MARIS database.
Lookup Table (LUT) in use:
Yes, dbo_nuclide.xlsx
Open Refine Variable Name:
nuclide_id
Open Refine Data Type:
An integer value (the ‘id’ defined in the LUT).
NetCDF Variable Name:
nuclide
NetCDF Data Type:
string
Detection Limit
Description:
The detection limit variable describes the Activity variable as follows:
‘<’: The reported value for the Activity variable is the Minimum Detectable Activity (MDA) or ISO11029 detection limit. ‘=’: The Activity variable represents the measured value, and an associated uncertainty should be provided. ‘ND’: Indicates that neither an activity value nor an MDA (or detection limit) is reported. ‘DE’: When the reported Activity variable is an aggregation of multiple samples, the detection limit variable is defined as Derived (DE), see Variable Type for more information related to aggregation of activity reported.
Lookup Table (LUT) in use:
Yes, dbo_detectlimit.xlsx.
Open Refine Variable Name:
detection
Open Refine Data Type:
An integer value (the ‘id’ defined in the LUT).
NetCDF Variable Name:
dl
NetCDF Data Type:
An integer value (the ‘id’ defined in the LUT).
Activity
Description:
The measured activity value or MDA for the nuclide reported. Several variables are used to describe the Activity variable, including:
Nuclide ID: Describes the nuclide for which the activity is reported. Detection Limit: Indicates whether the reported Activity value is a measured activity value or below the detection limit. Unit ID: Describes the unit associated with the reported Activity variable. Uncertainty: The associated uncertainty of the Activity variable. Variable Type: Describes whether the reported Activity variable is an aggregate, sum, mean, median, etc.
Lookup Table (LUT) in use:
No.
Open Refine Variable Name:
activity
Open Refine Data Type:
float
NetCDF Variable Name:
value
NetCDF Data Type:
float
Uncertainty
Description:
The uncertainty associated with the measurement of the activity must be reported as a 1 sigma (k=1) measurement uncertainty. This uncertainty should be expressed in the same units as the activity variable.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
uncertaint
Open Refine Data Type:
float
NetCDF Variable Name:
unc
NetCDF Data Type:
float
Unit ID
Description:
Represents the ID value from the Lookup Table (LUT) corresponding to the unit of measurement for both the activity variable and the uncertainty variable (if applicable). For seawater measurements, ensure that the unit is converted from ‘Bq L⁻¹’ to ‘Bq m⁻³’, and use the corresponding LUT value for ‘Bq m⁻³’.
Lookup Table (LUT) in use:
Yes, dbo_unit.xlsx.
Open Refine Variable Name:
unit_id
Open Refine Data Type:
An integer value (the ‘id’ defined in the LUT).
NetCDF Variable Name:
unit
NetCDF Data Type:
An integer value (the ‘id’ defined in the LUT).
Variable Type
Description:
Describes the type of aggregation applied to the measurements if they are not reported as individual values. Possible values include:
AM: Arithmetic Mean GM: Geometric Mean MED: Median MAX: Maximum MIN: Minimum
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
vartype
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Frequency
Description:
Indicates how often the sample is taken or the measurement is recorded. This variable helps to understand the regularity of data collection and can include details such as daily, weekly, monthly, or any other specified time interval.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
freq
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Range Low Detection
Description:
If aggregation occurred when evaluating the Activity variable, the ‘Range Low Detection’ value describes the ‘Range Low’ variable as follows:
- ‘<’: The reported value for the Activity variable is the Minimum Detectable Activity (MDA) or ISO11029 detection limit.
- ‘=’: The Activity variable represents the measured value, with an associated uncertainty provided.
- ‘ND’: Indicates that neither an activity value nor an MDA (or detection limit) is reported.
- ‘DE’: When the reported Activity variable is an aggregation of multiple samples, the detection limit variable is defined as Derived (DE). See the Variable Type section for more details on aggregation of reported activity.
Lookup Table (LUT) in use:
Yes, dbo_detectlimit.xlsx.
Open Refine Variable Name:
rl_detection
Open Refine Data Type:
An integer value (the ‘id’ defined in the LUT).
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Range Low
Description:
If aggregation is applied to the measurements, the ‘Range Low’ variable represents the smallest activity measured within the aggregated dataset. This value should be reported in a format consistent with the unit specified by the Unit ID variable.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
rangelow
Open Refine Data Type:
float
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Range Upper
Description:
If aggregation is applied to the measurements, the ‘Range Upper’ variable represents the largest activity measured within the aggregated dataset. This value should be reported in a format consistent with the unit specified by the Unit ID variable.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
rangeupp
Open Refine Data Type:
float
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Species ID
Description:
Represents the identifier for the species included in the sample. If a specific species is not provided but a biological group (e.g., ‘Fish’) is specified, use this group information to define the species.
Lookup Table (LUT) in use:
Yes, dbo_species.xlsx.
Open Refine Variable Name:
species_id
Open Refine Data Type:
An integer value (the ‘species_id’ defined in the LUT).
NetCDF Variable Name:
species
NetCDF Data Type:
An integer value (the ‘species_id’ defined in the LUT).
Biological Group
Description:
The biological group of the sample, if applicable. Grouping of related species (e.g. crustaceans, molluscs, fish etc.).
Lookup Table (LUT) in use:
Yes, dbo_species.xlsx includes a “biogroup_id” for all species which links to the dbo_biogroup.xlsx look-up.
Open Refine Variable Name:
None
Open Refine Data Type:
None
NetCDF Variable Name:
bio_group
NetCDF Data Type:
An integer value (the ‘biogroup_id’ defined in the LUT).
Taxon Name
Description:
Scientific name of the taxon.
Lookup Table (LUT) in use:
No, ‘Taxon Name’ is defined for each species in the dbo_species.xlsx look-up.
Open Refine Variable Name:
Taxonname
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Taxon Reported Name
Description:
Taxon name reported by the data provider.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
TaxonRepName
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Common Name
Description:
Common name of the species or organism.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
Commonname
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Taxon Rank
Description:
Rank of the taxon in the biological classification system.
Lookup Table (LUT) in use:
No, ‘Taxon Rank’ is defined for each species in the dbo_species.xlsx look-up.
Open Refine Variable Name:
Taxonrank
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Taxon Database
Description:
Database or repository where taxon information is stored.
Lookup Table (LUT) in use:
No, ‘Taxon Database’ is defined for each species in the dbo_species.xlsx look-up.
Open Refine Variable Name:
TaxonDB
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Taxon Database ID
Description:
Identifier for the taxon in the taxon database.
Lookup Table (LUT) in use:
No, ‘Taxon Database ID’ is defined for each species in the dbo_species.xlsx look-up.
Open Refine Variable Name:
TaxonDBID
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Taxon Database URL
Description:
URL the taxon database.
Lookup Table (LUT) in use:
No, ‘Taxon Database URL’ is defined for each species in the dbo_species.xlsx look-up.
Open Refine Variable Name:
TaxonDBURL
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Body Part ID
Description:
Represents the identifier for the specific body part of the sample.
Lookup Table (LUT) in use:
Yes, dbo_bodypar.xlsx.
Open Refine Variable Name:
bodypar_id
Open Refine Data Type:
An integer value (the ‘bodypar_id’ defined in the LUT).
NetCDF Variable Name:
body_part
NetCDF Data Type:
An integer value (the ‘bodypar_id’ defined in the LUT).
Slice Up
Description:
Top of sediment core interval relative to the water-sediment interface (cm).
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
sliceup
Open Refine Data Type:
float
NetCDF Variable Name:
top
NetCDF Data Type:
float
Slice Down
Description:
Bottom of sediment core interval relative to the water-sediment interface (cm).
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
slicedown
Open Refine Data Type:
float
NetCDF Variable Name:
bottom
NetCDF Data Type:
float
Sediment Type ID
Description:
Represents the classification of sediment according to the Udden-Wentworth scale.
Lookup Table (LUT) in use:
Yes, dbo_sedtype.xlsx.
Open Refine Variable Name:
sedtype_id
Open Refine Data Type:
An integer value (the ‘sedtype_id’ defined in the LUT).
NetCDF Variable Name:
sed_type
NetCDF Data Type:
An integer value (the ‘sedtype_id’ defined in the LUT).
Sediment Reported Name
Description:
Name of the sediment as reported by the data provider. The sediment name should be stored exactly as provided, without any modifications.
Lookup Table (LUT) in use:
No.
Open Refine Variable Name:
SedRepName
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Volume
Description:
Volume of the sample.
Lookup Table (LUT) in use:
No.
Open Refine Variable Name:
volume
Open Refine Data Type:
float
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Salinity
Description:
Salinity of the sample, expressed in practical salinity units (PSU).If required, consult TEOS-10 guidelines (www.teos-10.org/) for converting from Absolute Salinity (g/kg) to Practical Salinity.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
salinity
Open Refine Data Type:
float
NetCDF Variable Name:
salinity
NetCDF Data Type:
float
Temperature
Description:
Temperature of the sample (°C).
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
temperatur
Open Refine Data Type:
float
NetCDF Variable Name:
temperature
NetCDF Data Type:
float
Filtered
Description:
Indicates whether the sample was filtered: - Y : Sample was filtered. - N : Sample was not filtered. - NA : Not applicable or information not available.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
filtered
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Filter Pore Mesh size
Description:
The pore size of the filter used, if applicable, expressed in micrometers (µm).
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
filtpore
Open Refine Data Type:
float
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Acidified
Description:
Indicates if the sample was acidified. - A: Sample acidified - NA: Sample not acidified
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
acid
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Oxygen
Description:
Dissolved oxygen concentration.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
oxygen
Open Refine Data Type:
float
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Sample Area
Description:
Sample surface area of sediment (cm2).
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
samparea
Open Refine Data Type:
float
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Dry Weight
Description:
Dry weight of the sample, expressed in grams (g).
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
drywt
Open Refine Data Type:
float
NetCDF Variable Name:
drywt
NetCDF Data Type:
float
Wet Weight
Description:
Wet weight of the sample, expressed in grams (g).
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
wetwt
Open Refine Data Type:
float
NetCDF Variable Name:
wetwt
NetCDF Data Type:
float
Percent Weight
Description:
Expressed as a percentage. This is calculated by dividing the dry weight by the wet weight and then multiplying by 100. The reported value should be greater than 0 and less than 100.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
percentwt
Open Refine Data Type:
float
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Sampling Method ID
Description:
Identifier for the method used to collect the sample.
Lookup Table (LUT) in use:
Yes, dbo_sampmet.xlsx.
Open Refine Variable Name:
sampmet_id
Open Refine Data Type:
An integer value (the ‘sampmet_id’ defined in the LUT).
NetCDF Variable Name:
samp_met
NetCDF Data Type:
An integer value (the ‘sampmet_id’ defined in the LUT).
Drying Method ID
Description:
Identifier for the method used to dry the sample.
Lookup Table (LUT) in use:
Yes, [dbo_sampmet.xlsx]
Open Refine Variable Name:
drymet_id
Open Refine Data Type:
An integer value (the ‘id’ defined in the LUT).
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Preparation Method ID
Description:
Identifier for the method used to prepare the sample.
Lookup Table (LUT) in use:
Yes, dbo_prepmet.xlsx. ### Open Refine Variable Name: prepmet_id
Open Refine Data Type:
An integer value (the ‘prepmet_id’ defined in the LUT).
NetCDF Variable Name:
prep_met
NetCDF Data Type:
An integer value (the ‘prepmet_id’ defined in the LUT).
Counting Method ID
Description:
Identifier for the method used to count the sample.
Lookup Table (LUT) in use:
Yes, dbo_counmet.xlsx.
Open Refine Variable Name:
counmet_id
Open Refine Data Type:
An integer value (the ‘counmet_id’ defined in the LUT).
NetCDF Variable Name:
count_met
NetCDF Data Type:
An integer value (the ‘counmet_id’ defined in the LUT).
Reference ID
Description:
Identifier which identifies the source provider of the data.
Lookup Table (LUT) in use:
Yes, [dbo_ref.xlsx]
Open Refine Variable Name:
ref_id
Open Refine Data Type:
An integer value (the ‘id’ defined in the LUT).
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Reference Note
Description:
Notes or comments related to the reference or source.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
refnote
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Sample Note
Description:
Notes or comments related to the sample.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
sampnote
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Measurement Note
Description:
Notes or comments related to the measurement process.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
measurenote
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Good for Export
Description:
Indicates if the sample data is deemed good for export.
Lookup Table (LUT) in use:
No
Open Refine Variable Name:
gfe
Open Refine Data Type:
string
NetCDF Variable Name:
Not included in NetCDF.
NetCDF Data Type:
Not included in NetCDF.
Area
Description:
Provides the name of the area region where the sample was collected.
Lookup Table (LUT) in use:
Yes, dbo_area.xlsx.
Open Refine Variable Name:
area
Open Refine Data Type:
An integer value (the ‘area_id’ defined in the LUT).
NetCDF Variable Name:
area
NetCDF Data Type:
An integer value (the ‘area_id’ defined in the LUT).